VitaReach VITAREACH
VitaReach Pull-Out Pegboard System

Pre-order — Ships July 6th · Patent Pending · Founding Customer pricing active

Your board.
Just much closer.

The space above your bench was always there. Now you can use it. Pegboard, French cleat, or any panel — it all pulls out. How much closer is up to you.

16% Founding discount
5 Days to ship
120lb Per blade capacity
DIY Weekend install
Any Panel system

🚀 Pre-order — ships July 6th. Founding Customer pricing (16% off) locked in at checkout. You'll be first in line. Build your kit →

VitaReach TroveBlade pulled out, loaded with tools

Open architecture · Any panel system

Your board. Just much closer.

VitaReach is a wall-mounted pull-out system built on 2020 aluminum extrusions and ball-bearing slides. TroveBlades pull out into the dead space above your bench — both sides at eye level, no stretching, no ladder.

Pegboard, French cleat, or any panel you already use — it all mounts to a TroveBlade. We provide the motion. You provide everything else.

Plan Your Wall

What you're ordering

One kit = one TroveBlade

TroveBlade mechanism
TroveBlade cantilever mechanism Wall and ceiling lines. Two identical L-shaped cantilevers with slides both reaching the Plus panel line. wall ceiling Plus panel slide slide ceiling frame rod* upper lower Same part — flip for left, right, or center * rod not included — sourced locally
Wall frame
Two horizontal 2020 aluminum extrusions, top and bottom, spanning your wall width
TroveBlade cantilever carriers — one per blade
Two L-shaped 2020 extrusions fastened together. Ambidextrous design — with minimal adjustment, the same part works for left, right, or center position.
Ball-bearing slides — one pair per blade
Full extension or over-travel · 100LB or 150LB rated · mounted to cantilever arms
Ceiling stability kit
Ceiling extrusion + brackets + all mounting hardware
All mounting hardware
Lag screws, brackets, fasteners — everything to mount to studs
Installation videos
Installation videos available online · free pre-order consultation
Not included — you supply
Your panel (pegboard, French cleat plywood, or any flat board) · hooks and accessories · #10-32 threaded rod for ceiling kit (cut to your ceiling height, sourced locally)

Sound familiar?

You set your workplace.
Then the wall won.

"Wall cabinets above the workbench — placing them on the wall would make them too far back to reach anything."

— Garage Journal

"I'd be stuck using a step stool to reach the top shelf. That is not going to happen."

— DoItYourself.com

"I have learned to keep my workbench no more than 24" deep so I can put things on the wall and reach them."

— Garage Journal

There's a volume of space above your workbench that no wall system has ever properly used. Cabinets claim a shallow slice. Pegboard ignores it entirely. Most people end up limiting their bench depth just to reach the wall behind it. That's a compromise that shouldn't exist.

Wall cabinets

You stop opening them.

Shallow boxes. Doors that eat your workspace when open. Things at the back that go in once and never come out. You know what's in there. You just don't go in anymore.

Bottom shelf — reachable, if you crouch
Middle shelf — halfway there, back is gone
Top shelf — lost without a ladder
Never discovered pegboards or French cleats? Read on.
Fixed Panel Systems

Better — until the top rows win.

Everything visible — a real step up. Then you filled the reachable rows. The top half became empty air. Stretching over the bench, maybe a ladder, for things you use every day.

Visibility — a genuine improvement
Tough enough
Top rows go dead — ladder or give up
The volume above your bench? Still empty air.
VitaReach

Your board — just much closer.

Boards on steroids.

TroveBlades pull out. Both sides at eye level. Everything within reach.

Pegboard, French cleat, or any panel — mount it to a TroveBlade and pull it toward you. Your depth, your width, your system. We provide the motion.

Now the wall works for you, not against you.

Pulls into the space above your bench — depth is yours to choose
Pulls toward you — both sides at eye level
Works with any board system of your choice
You can finally make your workbench 30" deep. And why not 36?
Self-install in a weekend, if you can mount a full-motion TV in your living room.

Who It's For

Different spaces.
Same wall problem.

If any of this looks familiar — VitaReach was made for you.

Cluttered garage workbench
Garage · Auto shop

Tools on the bench. Bench can't be used.

Metal pegboard — WallControl, OmniWall, or any standard panel
Oil, grease, heavy tools — metal board handles it all
Both blade sides loaded — double your surface
Bottom shelf + drawer organizers — small parts sorted

"Tired of digging around in a toolbox? Pegboard is the solution." — Until pegboard runs out of room too.

Woodworking shop French cleat wall upper rows unused
Woodworker · Furniture builder

You built a French cleat wall. The top half is still dead air.

French cleat plywood — bolt the slides directly to your board, no adapter needed
Wood is a natural damper — quieter than metal, no rattle, holders lift off with a slight upward move
Custom holders, heavy hand tools — French cleat handles the weight
Move your bench back to the wall — reclaim the floor
Finally make your bench 30" deep. And why not 36?

"I could put shelves above the bench but I don't know if that would get annoying — it would overhang." — FineWoodworking

Messy sewing room
Sewing · Quilting · Craft room

Everything you need is somewhere. Just never where you're standing.

IKEA SKÅDIS or any plastic pegboard — lightweight, colorful, already has the accessories
Thread, rulers, scissors — all visible and within arm's reach
Pull out while you work, push back when you're done
Bottom shelf — notions, small bins, the stuff that never has a home

Professional shop, parts room, or multi-wall installation? VitaReach is built on industrial 2020 aluminum extrusion — rated slides, any wall length, custom configuration. Volume pricing available.

Let's talk →

How It Works

Wall-mounted. Pulls out. Everything reachable.

One system. Five components. If you can mount a full-motion TV, you can install this.

01

The Frame

Two horizontal 2020 aluminum extrusion rails mount to your wall studs — top and bottom. Black or silver. Sized to your wall. This is the foundation — rigid, lightweight, and permanent.

Aluminum 2020 · Black or Silver · Custom length
02

The TroveBlade

Your panel mounts to the frame and rides out on ball-bearing slides — full extension or over-travel. Pegboard attaches via the included 2020 rail. French cleat plywood bolts directly to the slides — no adapter needed. Pull it out and both sides are at eye level, fully accessible.

Any panel system · Full or Over-Travel · 100 or 150LB rated
03

TroveBlade Plus

A TroveBlade with a second panel on the front face and a bottom shelf for what hooks can't hold. You supply the extra panel and shelf — same kit price, we include the modification instructions. Over-travel slides recommended so the back face clears the neighboring panel when pulled out.

Customer-built · Your front panel + shelf · No added kit cost
04

Side-Safe

When a TroveBlade sits at the end of a rail against a side wall, it needs 2" of clearance to pull out without catching. Side-Safe shifts the blade that 2" automatically. TroveBlade Plus at a wall end requires a 12" wide front panel — narrow enough to stay out of the way, wide enough to allow access to the neighboring blade. Plan your wall ends early → The Wall Planner detects wall ends and configures this for you.

Wall-end position · 2" blade offset · Auto-configured in the Planner
05

Ceiling Stability Kit

Included with every kit. A ceiling-side brace that transfers load upward for a steadier, more rigid pull-out. Recommended on every install, and required at 16" depth with heavy loads or at 18"+ depth. You supply #10-32 threaded rods cut to your ceiling height — a few dollars at any hardware store. We provide everything else.

Included in every kit · 2020 brace + brackets + fasteners · You cut the rods to fit

Pricing

Transparent. No surprises.

Every price below is the real price. Use the Planner and Configurator below to get your exact total before you order.

TroveBlade Kit

Sectional frame · ball-bearing slides · all hardware

Panel not included — you supply your own

Per kit $282 founding: $237
150LB slides +$10 /kit
Over-travel slides +$15 /kit
Ceiling Stability Kit Included every kit

Each kit holds one panel — pegboard, French cleat plywood, or any board you supply. Pre-order — ships July 6th. Founding Customer pricing takes 16% off automatically — limited early run. Slide length (12"–18"+) sets your depth at no extra charge.

TroveBlade Plus

A TroveBlade with your own front panel + bottom shelf

Added cost $0 same kit price

TroveBlade Plus isn't a separate product — it's a TroveBlade you fit with your own second panel (front face) and a bottom shelf. The kit price is identical; you supply the extra panel and shelf. We include modification instructions and recommend over-travel slides so the back face clears the neighboring panel. See the Tips page →

Your exact price depends on your configuration. Use the Planner and Configurator below — it calculates your total in real time.

Plan Your Wall Build Your Kit

Something Else?

Custom sizes · different materials · non-workshop spaces

VitaReach is a pull-out wall system — not limited to the sizes and materials shown here. The Planner and Configurator cover the most common setups, but it works with pegboard, French cleat plywood, IKEA SKÅDIS, and most panel systems. If you have a board already, there's a good chance it works.

It's also not limited to garages and workshops. If you have a desk, a craft space, or any wall with wasted vertical room — the same pull-out principle applies.

Have a non-standard setup? Reach out — we'd like to hear from businesses with difficult storage requirements.

Contact Us →

Wall Planner

See your wall before you order.

Place your TroveBlades, detect wall ends, configure Side-Safe — then hand off your exact kit count straight to the configurator below.

Storage Calculator

How much accessible storage will you gain?

Take a guess. Then pick your panel size below and we'll calculate the real answer — accounting for pull-out access, both sides of every TroveBlade, and your TroveBlade Plus units.

Calculation is approximate — uses 32" as the meaningful average panel height.

How deep is your planned system?

Configure Your System

01

Number of TroveBlades

Founding customer pricing — limited early run
$282 / kit · ceiling kit included Founding customers save 16% — applied automatically at checkout

Panel not included. Each kit ships with the sectional aluminum frame, ball-bearing slides, and all mounting hardware. You supply your own panel — pegboard, French cleat plywood, IKEA SKÅDIS, or any board system you prefer. What panels fit? →

02

Frame Color

We match slides and hardware to your frame color where possible. Some components (particularly 150LB slides) are only available in silver finish regardless of frame color. See finish disclaimer →

03

Your Panel Height

Sets the frame section height
04

Slides

Length sets your depth · same for every kit in this order

Length / Depth

Type

Load Rating

05

Ceiling Stability Kit

Included with every kit — no choice needed
Included free in every TroveBlade Kit

Every kit ships with the ceiling-side brace, brackets, and #10-32 fasteners for a steadier, more rigid pull-out. You supply #10-32 threaded rods cut to your ceiling height (a few dollars at any hardware store). We include installation videos.

When to use it:

  • 12"–14" depth: Recommended — adds rigidity even on shallow setups.
  • 16" depth (100LB): Strongly recommended.
  • 16" depth (150LB): Required.
  • 18"+ depth: Required — deeper cantilevers must transfer load to the ceiling.

Because it's included, you're always ready to brace your system — even if you start shallow and go deeper later.

Your Total $237

🚀 Pre-order — ships July 6th

Founding Customer pricing locked in at checkout. First in line.

Made to order · Pre-order ships July 6th · Shipping calculated at checkout · You supply your own pegboard

By ordering you agree to our Terms & Disclaimer. Hardware finish may vary — see details.

Founding Customers

You're early. Here's what that gets you.

We're a small team building something genuinely new. Founding Customers get real benefits — and the chance to shape what comes next.

Active now

16% Off — Applied Automatically

Pre-order now — ships July 6th. Founding Customer pricing active right now. No code needed — the discount applies at checkout automatically. Limited early run. Once it's gone, it's gone.

Build Your Kit →
Get featured

Share Your Build

Send us photos or a short video of your finished wall. We feature early builds on our site and socials — and customers who share get first access to new products and a thank-you discount on future orders.

Build Your Kit →
Go deeper

Deep-Depth Beta

We're testing deeper TroveBlades for extended reach — limited quantities, may have adjusted pricing, ceiling brace installation essential. Interested in going beyond 16"? Choose 18"+ depth in the configurator or get in touch and we'll work through it with you.

Build Your Kit →

Before You Order

Any questions? Just ask.

Send us your measurements and photos of your setup and we'll help you figure out the right configuration before you order — free. And once your kit arrives, we're available for a free video consultation to walk through the installation with you. We respond within 24 hours.

Email Us for a Free Consultation →

Attach photos of your wall and workbench — dimensions, existing storage, anything that helps us see your space. We'll come back with a recommended configuration within 24 hours.